Prof. Dr. Holger Militz

Name Card

Main Affiliation
 
Staff Status
unigoe
 

1-86 of 86
 
The bibliographical data in your publication list are complete
You can correct existing data in the blue highlighted fields.To do this, please click on the coloured field. It is not possible to delete data here.
Fields that are not marked in colour (e. g. the authors) can be edited using the input form. To do so, click on the in front of the respective publication.
The bibliographic data in your publication list may be incomplete. You can
  • add any missing data in the fields marked in red or
  • correct existing data in the blue highlighted fields.
To do this, please click on the coloured field. It is not possible to delete data here.
Fields that are not marked in colour (e. g. the authors) can be edited using the input form. To do so, click on the in front of the respective publication.
Check/Uncheck all
  • 2022 | Journal Article | Research Paper | 
    ​ ​Compression of Acetylated Beech (Fagus sylvatica L.) Laminated Veneer Lumber (LVL)​
    Slabohm, M.; Mayer, A. K. & Militz, H. ​ (2022) 
    Forests, 13(7).​ DOI: https://doi.org/10.3390/f13071122 
    ​Details  DOI 
  • 2022 | Journal Article | Research Paper | 
    ​ ​Incising and Double Impregnation of Beech Sleepers—Investigation of an Alternative Preservation System for Wooden Railway Sleepers​
    Starck, M.; Heidel, A.; Brischke, C.   & Militz, H. ​ (2022) 
    Frontiers in Forests and Global Change, 5.​ DOI: https://doi.org/10.3389/ffgc.2022.814049 
    ​Details  DOI 
  • 2022 | Journal Article | Research Paper | 
    ​ ​Investigations of the Chemical Distribution in Sorbitol and Citric Acid (SorCA) Treated Wood—Development of a Quality Control Method on the Basis of Electromagnetic Radiation​
    Kurkowiak, K.; Mayer, A. K.; Emmerich, L. & Militz, H. ​ (2022) 
    Forests, 13(2) art. 151​.​ DOI: https://doi.org/10.3390/f13020151 
    ​Details  DOI 
  • 2022 | Journal Article | Research Paper
    ​ ​Bonding performance of hot-bonded acetylated beech ( Fagus sylvatica L.) laminated veneer lumber (LVL)​
    Slabohm, M. & Militz, H. ​ (2022) 
    Wood Material Science and Engineering, pp. 1​-6​.​ DOI: https://doi.org/10.1080/17480272.2022.2124544 
    ​Details  DOI 
  • 2022 | Journal Article | Research Paper | 
    ​ ​Non-Destructive Evaluation of the Cutting Surface of Hardwood Finger Joints​
    Stolze, H.; Gurnik, M.; Koddenberg, T.; Kröger, J.; Köhler, R.; Viöl, W. & Militz, H. ​ (2022) 
    Sensors, 22(10) pp. 3855​.​ DOI: https://doi.org/10.3390/s22103855 
    ​Details  DOI 
  • 2022 | Journal Article | Research Paper | 
    ​ ​Bonding Acetylated Veneer for Engineered Wood Products—A Review​
    Slabohm, M.; Mai, C.   & Militz, H. ​ (2022) 
    Materials, 15(10) pp. 3665​.​ DOI: https://doi.org/10.3390/ma15103665 
    ​Details  DOI 
  • 2022 | Journal Article | 
    ​ ​Radial microfibril arrangements in wood cell walls​
    Maaß, M. C. ; Saleh, S.; Militz, H.   & Volkert, C. A. ​ (2022) 
    Planta, 256(4).​ DOI: https://doi.org/10.1007/s00425-022-03976-2 
    ​Details  DOI 
  • 2022 | Journal Article | 
    ​ ​Vacuum Low-Temperature Microwave-Assisted Pyrolysis of Technical Lignins​
    Karthäuser, J.; Biziks, V. ; Frauendorf, H. ; Mai, C.   & Militz, H. ​ (2022) 
    Polymers, 14(16) pp. 3383​.​ DOI: https://doi.org/10.3390/polym14163383 
    ​Details  DOI 
  • 2022 | Journal Article | 
    ​ ​Effect of pressurized hot water extraction and esterification on the moisture properties and decay resistance of Scots pine ( Pinus sylvestris L.) sapwood​
    Kyyrö, S.; Altgen, M. ; Belt, T.; Seppäläinen, H.; Brischke, C. ; Heinze, P. & Militz, H.  et al.​ (2022) 
    Holzforschung, 76(10) pp. 916​-928​.​ DOI: https://doi.org/10.1515/hf-2022-0100 
    ​Details  DOI 
  • 2022 | Journal Article
    ​ ​Characterizing surface adhesion-related chemical properties of copper azole and disodium octaborate tetrahydrate-impregnated Eucalyptus grandis wood​
    Alade, A. A.; Naghizadeh, Z.; Wessels, C. B.; Stolze, H. & Militz, H. ​ (2022) 
    Journal of Adhesion Science and Technology, pp. 1​-24​.​ DOI: https://doi.org/10.1080/01694243.2022.2125208 
    ​Details  DOI 
  • 2022 | Journal Article
    ​ ​Understanding the mode of action of sorbitol and citric acid (SorCA) in wood​
    Kurkowiak, K.; Hentges, D.; Dumarçay, S.; Gérardin, P. & Militz, H. ​ (2022) 
    Wood Material Science & Engineering, pp. 1​-9​.​ DOI: https://doi.org/10.1080/17480272.2022.2125340 
    ​Details  DOI 
  • 2022 | Journal Article | 
    ​ ​Biological Durability of Wood–Polymer Composites—The Role of Moisture and Aging​
    Buschalsky, A.; Brischke, C. ; Klein, K. C.; Kilian, T. & Militz, H. ​ (2022) 
    Materials, 15(23) art. 8556​.​ DOI: https://doi.org/10.3390/ma15238556 
    ​Details  DOI 
  • 2021 | Journal Article
    ​ ​Growth behavior of wood-destroying fungi in chemically modified wood: wood degradation and translocation of nitrogen compounds​
    Emmerich, L.; Bleckmann, M.; Strohbusch, S.; Brischke, C. ; Bollmus, S.   & Militz, H. ​ (2021) 
    Holzforschung, 75(9) pp. 786​-797​.​ DOI: https://doi.org/10.1515/hf-2020-0252 
    ​Details  DOI 
  • 2021 | Journal Article
    ​ ​Improving fire retardancy of unheated and heat-treated fir wood by nano-sepiolite​
    Taghiyari, H. R.; Tajvidi, M.; Soltani, A.; Esmailpour, A.; Khodadoosti, G.; Jafarzadeh, H. & Militz, H.  et al.​ (2021) 
    European Journal of Wood and Wood Products,.​ DOI: https://doi.org/10.1007/s00107-021-01679-1 
    ​Details  DOI 
  • 2021 | Journal Article
    ​ ​Mechanical properties and biological durability in soil contact of chemically modified wood treated in an open or in a closed system using glycerol/maleic anhydride systems​
    Mubarok, M.; Militz, H. ; Dumarcay, S.; Darmawan, W.; Hadi, Y. S. & Gérardin, P.​ (2021) 
    Wood Material Science and Engineering, pp. 1​-10​.​ DOI: https://doi.org/10.1080/17480272.2021.1872701 
    ​Details  DOI 
  • 2021 | Journal Article | 
    ​ ​Weathering Stability and Durability of Birch Plywood Modified with Different Molecular Weight Phenol-Formaldehyde Oligomers​
    Grinins, J.; Biziks, V. ; Marais, B. N.; Rizikovs, J. & Militz, H. ​ (2021) 
    Polymers, 13(2) pp. 175​.​ DOI: https://doi.org/10.3390/polym13020175 
    ​Details  DOI 
  • 2021 | Journal Article | 
    ​ ​Penetration of Different Liquids in Wood-Based Composites: The Effect of Adsorption Energy​
    Taghiyari, H. R.; Majidi, R.; Arsalan, M. G.; Moradiyan, A.; Militz, H. ; Ntalos, G. & Papadopoulos, A. N.​ (2021) 
    Forests, 12(1) pp. 63​.​ DOI: https://doi.org/10.3390/f12010063 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Effect of phenol-formaldehyde (PF) resin oligomer size on the decay resistance of beech wood​
    Biziks, V. ; Bicke, S.; Koch, G. & Militz, H. ​ (2020) 
    Holzforschung, 75(6) pp. 574​-583​.​ DOI: https://doi.org/10.1515/hf-2020-0020 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Use of computed tomography to determine penetration paths and the distribution of melamine resin in thermally-modified beech veneers after plasma treatment​
    Wascher, R.; Bittner, F.; Avramidis, G.; Bellmann, M.; Endres, H.-J.; Militz, H.   & Viöl, W.​ (2020) 
    Composites Part A: Applied Science and Manufacturing, 132 pp. 105821​.​ DOI: https://doi.org/10.1016/j.compositesa.2020.105821 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Weathering properties of wood-plastic composites based on heat-treated wood and polypropylene​
    Kuka, E.; Andersons, B.; Cirule, D.; Andersone, I.; Kajaks, J.; Militz, H.   & Bicke, S.​ (2020) 
    Composites Part A: Applied Science and Manufacturing, 139 pp. 106102​.​ DOI: https://doi.org/10.1016/j.compositesa.2020.106102 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Wood modification research in Europe​
    Militz, H. ​ (2020) 
    Holzforschung, 74(4) pp. 333​.​ DOI: https://doi.org/10.1515/hf-2020-0050 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Study on the impregnation quality of rubberwood (Hevea brasiliensis Müll. Arg.) and English oak (Quercus robur L.) sawn veneers after treatment with 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU)​
    Emmerich, L. & Militz, H. ​ (2020) 
    Holzforschung, 74(4) pp. 362​-371​.​ DOI: https://doi.org/10.1515/hf-2019-0110 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Three-Dimensional Exploration of Soft-Rot Decayed Conifer and Angiosperm Wood by X-Ray Micro-Computed Tomography​
    Koddenberg, T.; Zauner, M. & Militz, H. ​ (2020) 
    Micron, 134 pp. 102875​.​ DOI: https://doi.org/10.1016/j.micron.2020.102875 
    ​Details  DOI 
  • 2020 | Journal Article | Research Paper
    ​ ​The Structural Origins of Wood Cell Wall Toughness​
    Maaß, M. C. ; Saleh, S.; Militz, H.   & Volkert, C. A. ​ (2020) 
    Advanced Materials, 32(16) pp. 1907693​.​ DOI: https://doi.org/10.1002/adma.201907693 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Effect of Grain Direction on Drilling Resistance Measurements in Wood​
    Sharapov, E.; Brischke, C.   & Militz, H. ​ (2020) 
    International Journal of Architectural Heritage, 15(2) pp. 250​-258​.​ DOI: https://doi.org/10.1080/15583058.2020.1766158 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Wood durability in terrestrial and aquatic environments – A review of biotic and abiotic influence factors​
    Marais, B. N.; Brischke, C.   & Militz, H. ​ (2020) 
    Wood Material Science and Engineering, pp. 1​-24​.​ DOI: https://doi.org/10.1080/17480272.2020.1779810 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Resistance against subterranean termite of beech wood impregnated with different derivatives of glycerol or polyglycerol and maleic anhydride followed by thermal modification: a field test study​
    Mubarok, M.; Militz, H. ; Darmawan, I. W.; Hadi, Y. S.; Dumarçay, S. & Gérardin, P.​ (2020) 
    European Journal of Wood and Wood Products, 78(2) pp. 387​-392​.​ DOI: https://doi.org/10.1007/s00107-020-01503-2 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Fatigue behavior of beech and pine wood modified with low molecular weight phenol-formaldehyde resin​
    Pečnik, J. G.; Kutnar, A.; Militz, H. ; Schwarzkopf, M. & Schwager, H.​ (2020) 
    Holzforschung, 75(1) pp. 37​-47​.​ DOI: https://doi.org/10.1515/hf-2020-0015 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Chemistry and Spectroscopy of Renewable Materials, Part 2: Investigation of Suitably Esterified Wood Regarding Penetration and Distribution of the Chemically Modifying Reagent by Means of High-Resolution 3D Computed Tomography​
    Söftje, M.; Koddenberg, T.; Militz, H. ; Drafz, M. H. H.; Namyslo, J. C. & Kaufmann, D. E.​ (2020) 
    ACS Sustainable Chemistry & Engineering, 8(19) pp. 7353​-7358​.​ DOI: https://doi.org/10.1021/acssuschemeng.0c01574 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Long-term performance of DMDHEU-treated wood installed in different test set-ups in ground, above ground and in the marine environment​
    Emmerich, L.; Militz, H.   & Brischke, C. ​ (2020) 
    International wood products journal, 11(1) pp. 27​-37​.​ DOI: https://doi.org/10.1080/20426445.2020.1715553 
    ​Details  DOI 
  • 2020 | Journal Article
    ​ ​Suitability of a lignin-derived mono-phenol mimic to replace phenol in phenol-formaldehyde resin for use in wood treatment​
    Biziks, V. ; Fleckenstein, M.; Mai, C.   & Militz, H. ​ (2020) 
    Holzforschung, 74(4) pp. 344​-350​.​ DOI: https://doi.org/10.1515/hf-2019-0061 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Heat Treatment of Pine Wood: Possible Effect of Impregnation with Silver Nanosuspension​
    Taghiyari, H. R.; Bayani, S.; Militz, H.   & Papadopoulos, A. N.​ (2020) 
    Forests, 11(4) pp. 466​.​ DOI: https://doi.org/10.3390/f11040466 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Surface Activation of Polylactic Acid-Based Wood-Plastic Composite by Atmospheric Pressure Plasma Treatment​
    Sauerbier, P.; Köhler, R.; Renner, G. & Militz, H. ​ (2020) 
    Materials, 13(20) pp. 4673​.​ DOI: https://doi.org/10.3390/ma13204673 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Plasma Treatment of Polypropylene-Based Wood–Plastic Composites (WPC): Influences of Working Gas​
    Sauerbier, P.; Köhler, R.; Renner, G. & Militz, H. ​ (2020) 
    Polymers, 12(9) pp. 1933​.​ DOI: https://doi.org/10.3390/polym12091933 
    ​Details  DOI 
  • 2020 | Journal Article | Research Paper | 
    ​ ​Studies into Fungal Decay of Wood In Ground Contact—Part 1: The Influence of Water-Holding Capacity, Moisture Content, and Temperature of Soil Substrates on Fungal Decay of Selected Timbers​
    Marais, B. N.; Brischke, C. ; Militz, H. ; Peters, J. H. & Reinhardt, L.​ (2020) 
    Forests, 11(12) pp. 1284​.​ DOI: https://doi.org/10.3390/f11121284 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Assessment of Preservative-Treated Wooden Poles Using Drilling-Resistance Measurements​
    Sharapov, E.; Brischke, C.   & Militz, H. ​ (2020) 
    Forests, 11(1) pp. 20​.​ DOI: https://doi.org/10.3390/f11010020 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Characterization of Archaeological European White Elm (Ulmus laevis P.) and Black Poplar (Populus nigra L.)​
    Ghavidel, A.; Hosseinpourpia, R. ; Militz, H. ; Vasilache, V. & Sandu, I.​ (2020) 
    Forests, 11(12) pp. 1329​.​ DOI: https://doi.org/10.3390/f11121329 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Beech wood modification based on in situ esterification with sorbitol and citric acid​
    Mubarok, M.; Militz, H. ; Dumarçay, S. & Gérardin, P.​ (2020) 
    Wood Science and Technology, 54(3) pp. 479​-502​.​ DOI: https://doi.org/10.1007/s00226-020-01172-7 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Sorption behavior and hydroxyl accessibility of wood treated with different cyclic N-methylol compounds​
    Emmerich, L.; Altgen, M. ; Rautkari, L. & Militz, H. ​ (2020) 
    Journal of Materials Science, 55(35) pp. 16561​-16575​.​ DOI: https://doi.org/10.1007/s10853-020-05224-y 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Tensile and Impact Bending Properties of Chemically Modified Scots Pine​
    Bollmus, S. ; Beeretz, C. & Militz, H. ​ (2020) 
    Forests, 11(1) pp. 84​.​ DOI: https://doi.org/10.3390/f11010084 
    ​Details  DOI 
  • 2020 | Journal Article | 
    ​ ​Potential Use of Wollastonite as a Filler in UF Resin Based Medium-Density Fiberboard (MDF)​
    Taghiyari, H. R.; Esmailpour, A.; Majidi, R.; Morrell, J. J.; Mallaki, M.; Militz, H.   & Papadopoulos, A. N.​ (2020) 
    Polymers, 12(7) pp. 1435​.​ DOI: https://doi.org/10.3390/polym12071435 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Impact of drill bit feed rate and rotational frequency on the evaluation of wood properties by drilling resistance measurements​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Toropov, A.​ (2019) 
    International wood products journal, 10(4) pp. 128​-138​.​ DOI: https://doi.org/10.1080/20426445.2019.1688455 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Physico-mechanical properties of thermally modified Eucalyptus nitens wood for decking applications​
    Wentzel, M.; González-Prieto, Ó.; Brischke, C.   & Militz, H. ​ (2019) 
    Drvna industrija, 70(3) pp. 235​-245​.​ DOI: https://doi.org/10.5552/drvind.2019.1838 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Visual and machine strength grading of European ash and maple for glulam application​
    Kovryga, A.; Schlotzhauer, P.; Stapel, P.; Militz, H.   & van de Kuilen, J. van de Kuilen, Jan-Willem G.​ (2019) 
    Holzforschung, 73(8) pp. 773​-787​.​ DOI: https://doi.org/10.1515/hf-2018-0142 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Prediction of modulus of elasticity in static bending and density of wood at different moisture contents and feed rates by drilling resistance measurements​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Smirnova, E.​ (2019) 
    European Journal of Wood and Wood Products, 77(5) pp. 833​-842​.​ DOI: https://doi.org/10.1007/s00107-019-01439-2 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Dynamic and static mechanical properties of Eucalyptus nitens thermally modified in an open and closed reactor system​
    Wentzel, M.; Brischke, C.   & Militz, H. ​ (2019) 
    Maderas. Ciencia y tecnología,(ahead) pp. 0​-0​.​ DOI: https://doi.org/10.4067/S0718-221X2019005000201 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Volumetric estimate of bordered pits in Pinus sylvestris based on X-ray tomography and light microscopy imaging​
    Koddenberg, T.; Wentzel, M. & Militz, H. ​ (2019) 
    Micron, 124 pp. 102704​.​ DOI: https://doi.org/10.1016/j.micron.2019.102704 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Non-biocide antifungal and anti-termite wood preservation treatments based on combinations of thermal modification with different chemical additives​
    Mubarok, M.; Dumarcay, S.; Militz, H. ; Candelier, K.; Thévenon, M. F. & Gérardin, P.​ (2019) 
    European Journal of Wood and Wood Products, 77(6) pp. 1125​-1136​.​ DOI: https://doi.org/10.1007/s00107-019-01468-x 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Chemical analysis and cellulose crystallinity of thermally modified Eucalyptus nitens wood from open and closed reactor systems using FTIR and X-ray crystallography​
    Wentzel, M.; Rolleri, A.; Pesenti, H. & Militz, H. ​ (2019) 
    European Journal of Wood and Wood Products, 77(4) pp. 517​-525​.​ DOI: https://doi.org/10.1007/s00107-019-01411-0 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Comparison of different treatments based on glycerol or polyglycerol additives to improve properties of thermally modified wood​
    Mubarok, M.; Dumarcay, S.; Militz, H. ; Candelier, K.; Thevenon, M. F. & Gérardin, P.​ (2019) 
    European Journal of Wood and Wood Products, 77(5) pp. 799​-810​.​ DOI: https://doi.org/10.1007/s00107-019-01429-4 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​The effect of fibreboard (MDF) disintegration technique on wood polymer composites (WPC) produced with recovered wood particles​
    Bütün, F. Y. ; Sauerbier, P.; Militz, H.   & Mai, C. ​ (2019) 
    Composites Part A: Applied Science and Manufacturing, 118 pp. 312​-316​.​ DOI: https://doi.org/10.1016/j.compositesa.2019.01.006 
    ​Details  DOI 
  • 2019 | Journal Article
    ​ ​Activation of glucose with Fenton’s reagent: chemical structures of activated products and their reaction efficacy toward cellulosic material​
    Guo, W.; Xiao, Z.; Tang, L.; Zhang, Z.; Wang, Y. ; Lv, J. & Militz, H.  et al.​ (2019) 
    Holzforschung, 73(6) pp. 579​-587​.​ DOI: https://doi.org/10.1515/hf-2018-0153 
    ​Details  DOI 
  • 2019 | Journal Article | Research Paper
    ​ ​Anatomical characteristics of thermally modified Eucalyptus nitens wood in an open and closed reactor system​
    Wentzel, M.; Koddenberg, T. & Militz, H. ​ (2019) 
    Wood Material Science & Engineering, 15(4) pp. 223​-228​.​ DOI: https://doi.org/10.1080/17480272.2019.1572649 
    ​Details  DOI 
  • 2019 | Journal Article | 
    ​ ​Wood Protection through Plasma Powder Deposition—An Alternative Coating Process​
    Köhler, R.; Sauerbier, P.; Ohms, G.; Viöl, W. & Militz, H. ​ (2019) 
    Forests, 10(10) pp. 898​.​ DOI: https://doi.org/10.3390/f10100898 
    ​Details  DOI 
  • 2019 | Journal Article | 
    ​ ​Resistance of Injection Molded Wood-Polypropylene Composites against Basidiomycetes According to EN 15534-1: New Insights on the Test Procedure, Structural Alterations, and Impact of Wood Source​
    Krause, K. C. ; Brischke, C. ; Koddenberg, T.; Buschalsky, A.; Militz, H.   & Krause, A.​ (2019) 
    Fibers, 7(10) pp. 92​.​ DOI: https://doi.org/10.3390/fib7100092 
    ​Details  DOI 
  • 2018 | Journal Article | Erratum
    ​ ​Corrigendum: Comparison of three dielectric barrier discharges regarding their physical characteristics and influence on the adhesion properties of maple, high density fiberboard and wood plastic composite (2017 J. Phys. D: Appl. Phys . 50 475206)​
    Peters, F.; Hünnekens, B. ; Wieneke, S. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2018) 
    Journal of Physics D: Applied Physics, 51(15) pp. 159501​.​ DOI: https://doi.org/10.1088/1361-6463/aab378 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems​
    Wentzel, M.; Fleckenstein, M.; Hofmann, T.   & Militz, H. ​ (2018) 
    Wood Material Science and Engineering, 14(3) pp. 165​-173​.​ DOI: https://doi.org/10.1080/17480272.2018.1450783 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​UV-blocking properties of Zn/ZnO coatings on wood deposited by cold plasma spraying at atmospheric pressure​
    Wallenhorst, L.; Gurău, L.; Gellerich, A. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2018) 
    Applied Surface Science, 434 pp. 1183​-1192​.​ DOI: https://doi.org/10.1016/j.apsusc.2017.10.214 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Coating performance on glutaraldehyde-modified wood​
    Xiao, Z.; Chen, H.; Mai, C. ; Militz, H.   & Xie, Y.​ (2018) 
    Journal of Forestry Research, 30(1) pp. 353​-361​.​ DOI: https://doi.org/10.1007/s11676-018-0620-y 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Penetration depth of phenol-formaldehyde (PF) resin into beech wood studied by light microscopy​
    Biziks, V. ; Bicke, S. & Militz, H. ​ (2018) 
    Wood Science and Technology, 53(1) pp. 165​-176​.​ DOI: https://doi.org/10.1007/s00226-018-1058-2 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​The influence of curing conditions on properties of melamine modified wood​
    Behr, G.; Gellerich, A. ; Bollmus, S. ; Brinker, S. & Militz, H. ​ (2018) 
    European Journal of Wood and Wood Products, 76(4) pp. 1263​-1272​.​ DOI: https://doi.org/10.1007/s00107-018-1290-3 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Analyzing reversible changes in hygroscopicity of thermally modified eucalypt wood from open and closed reactor systems​
    Wentzel, M.; Altgen, M.   & Militz, H. ​ (2018) 
    Wood Science and Technology, 52(4) pp. 889​-907​.​ DOI: https://doi.org/10.1007/s00226-018-1012-3 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Combined effect of wood moisture content, drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce ( Picea abies (L.) Karst.)​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Smirnova, E.​ (2018) 
    Wood Material Science and Engineering, 15(4) pp. 198​-204​.​ DOI: https://doi.org/10.1080/17480272.2018.1557249 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Density and density profile changes in birch and spruce caused by thermo-hydro treatment measured by X-ray computed tomography​
    Biziks, V. ; Van Acker, J.; Militz, H. ; Grinins, J. & Van den Bulcke, J.​ (2018) 
    Wood Science and Technology, 53(2) pp. 491​-504​.​ DOI: https://doi.org/10.1007/s00226-018-1070-6 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​The influence of curing conditions on the properties of European beech ( Fagus sylvatica ) modified with melamine resin assessed by light microscopy and SEM-EDX​
    Behr, G.; Bollmus, S. ; Gellerich, A.   & Militz, H. ​ (2018) 
    International wood products journal, 9(1) pp. 22​-27​.​ DOI: https://doi.org/10.1080/20426445.2017.1416738 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Impact of plasma treatment under atmospheric pressure on surface chemistry and surface morphology of extruded and injection-molded wood-polymer composites (WPC)​
    Hünnekens, B. ; Avramidis, G.; Ohms, G.; Krause, A.; Viöl, W. & Militz, H. ​ (2018) 
    Applied Surface Science, 441 pp. 564​-574​.​ DOI: https://doi.org/10.1016/j.apsusc.2018.01.294 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Effects of white rot and brown rot decay on the drilling resistance measurements in wood​
    Sharapov, E.; Brischke, C. ; Militz, H.   & Smirnova, E.​ (2018) 
    Holzforschung, 72(10) pp. 905​-913​.​ DOI: https://doi.org/10.1515/hf-2017-0204 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Morphological imaging and quantification of axial xylem tissue in Fraxinus excelsior L. through X-ray micro-computed tomography​
    Koddenberg, T. & Militz, H. ​ (2018) 
    Micron, 111 pp. 28​-35​.​ DOI: https://doi.org/10.1016/j.micron.2018.05.004 
    ​Details  DOI 
  • 2018 | Journal Article | Research Paper
    ​ ​Wood modification with DMDHEU (1.3-dimethylol-4.5-dihydroxyethyleneurea) – State of the art, recent research activities and future perspectives​
    Emmerich, L.; Bollmus, S.   & Militz, H. ​ (2018) 
    Wood Material Science & Engineering, 14(1) pp. 3​-18​.​ DOI: https://doi.org/10.1080/17480272.2017.1417907 
    ​Details  DOI 
  • 2018 | Journal Article | 
    ​ ​Atmospheric Pressure Plasma Coating of Bismuth Oxide Circular Droplets​
    Köhler, R.; Ohms, G.; Militz, H.   & Viöl, W.​ (2018) 
    Coatings, 8(9) pp. 312​.​ DOI: https://doi.org/10.3390/coatings8090312 
    ​Details  DOI 
  • 2018 | Journal Article
    ​ ​Sorption and surface energy properties of thermally modified spruce wood components​
    Källbom, S.; Altgen, M. ; Militz, H.   & Wålinder, M.​ (2018) 
    Wood and Fiber Science, 50(3) pp. 346​-357​.​ DOI: https://doi.org/10.22382/wfs-2018-033 
    ​Details  DOI 
  • 2017 | Journal Article
    ​ ​Plywood made from plasma-treated veneers: Shear strength after shrinkage-swelling stress​
    Wascher, R.; Avramidis, G.; Kühn, C.; Militz, H.   & Viöl, W.​ (2017) 
    International Journal of Adhesion and Adhesives, 78 pp. 212​-215​.​ DOI: https://doi.org/10.1016/j.ijadhadh.2017.07.003 
    ​Details  DOI 
  • 2017 | Journal Article
    ​ ​Exploring the potential of high resolution mass spectrometry for the investigation of lignin-derived phenol substitutes in phenolic resin syntheses​
    Dier, T. K. F.; Fleckenstein, M.; Militz, H.   & Volmer, D. A.​ (2017) 
    Analytical and Bioanalytical Chemistry, 409(13) pp. 3441​-3451​.​ DOI: https://doi.org/10.1007/s00216-017-0282-1 
    ​Details  DOI 
  • 2017 | Journal Article
    ​ ​Accessibility of hydroxyl groups in anhydride modified wood as measured by deuterium exchange and saponification​
    Beck, G.; Strohbusch, S.; Larnøy, E.; Militz, H.   & Hill, C.​ (2017) 
    Holzforschung, 72(1) pp. 17​-23​.​ DOI: https://doi.org/10.1515/hf-2017-0059 
    ​Details  DOI 
  • 2017 | Journal Article
    ​ ​Improvement of mechanical properties of thermally modified hardwood through melamine treatment​
    Behr, G.; Bollmus, S. ; Gellerich, A.   & Militz, H. ​ (2017) 
    Wood Material Science and Engineering, 13(5) pp. 262​-270​.​ DOI: https://doi.org/10.1080/17480272.2017.1313313 
    ​Details  DOI 
  • 2017 | Journal Article
    ​ ​Hydrophobic recovery of atmospheric pressure plasma treated surfaces of Wood-Polymer Composites (WPC)​
    Hünnekens, B. ; Krause, A.; Militz, H.   & Viöl, W.​ (2017) 
    European Journal of Wood and Wood Products, 75(5) pp. 761​-766​.​ DOI: https://doi.org/10.1007/s00107-017-1175-x 
    ​Details  DOI 
  • 2017 | Journal Article
    ​ ​Topographic, optical and chemical properties of zinc particle coatings deposited by means of atmospheric pressure plasma​
    Wallenhorst, L.; Loewenthal, L.; Avramidis, G.; Gerhard, C. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2017) 
    Applied Surface Science, 410 pp. 485​-493​.​ DOI: https://doi.org/10.1016/j.apsusc.2017.03.021 
    ​Details  DOI 
  • 2017 | Journal Article
    ​ ​Modification of beech veneers with lignin phenol formaldehyde resins in the production of laminated veneer lumber (LVL)​
    Fleckenstein, M.; Biziks, V. ; Mai, C.   & Militz, H. ​ (2017) 
    European Journal of Wood and Wood Products, 76(3) pp. 843​-851​.​ DOI: https://doi.org/10.1007/s00107-017-1275-7 
    ​Details  DOI 
  • 2017 | Journal Article | 
    ​ ​Comparison of three dielectric barrier discharges regarding their physical characteristics and influence on the adhesion properties on maple, high density fiberboards and wood plastic composite​
    Peters, F.; Hünnekens, B. ; Wieneke, S. ; Militz, H. ; Ohms, G. & Viöl, W.​ (2017) 
    Journal of Physics D: Applied Physics, 50(47) pp. 475206​.​ DOI: https://doi.org/10.1088/1361-6463/aa8fad 
    ​Details  DOI 
  • 2016 | Journal Article
    ​ ​Impact of air-plasma treatment at atmospheric pressure on wood and wood extractives​
    Avramidis, G.; Wascher, R.; Militz, H.   & Viöl, W.​ (2016) 
    International wood products journal, 7(2) pp. 76​-79​.​ DOI: https://doi.org/10.1080/20426445.2016.1162429 
    ​Details  DOI 
  • 2016 | Journal Article
    ​ ​Improved resource efficiency and cascading utilisation of renewable materials​
    Geldermann, J. ; Kolbe, L. M. ; Krause, A.; Mai, C. ; Militz, H. ; Osburg, V.-S. & Schobel, A.  et al.​ (2016) 
    Journal of Cleaner Production, 110 pp. 1​-8​.​ DOI: https://doi.org/10.1016/j.jclepro.2015.09.092 
    ​Details  DOI  WoS 
  • 2016 | Journal Article
    ​ ​Bonding of acetylated wood​
    Bongers, F.; Meijerink, T.; Lütkemeier, B.; Lankveld, C.; Alexander, J.; Militz, H.   & Lehringer, C.​ (2016) 
    International wood products journal, 7(2) pp. 102​-106​.​ DOI: https://doi.org/10.1080/20426445.2016.1161944 
    ​Details  DOI 
  • 2015 | Journal Article
    ​ ​Shear strength of furfurylated, N-methylol melamine and thermally modified wood bonded with three conventional adhesives​
    Bastani, A.; Adamopoulos, S. & Militz, H. ​ (2015) 
    Wood Material Science and Engineering, 12(4) pp. 236​-241​.​ DOI: https://doi.org/10.1080/17480272.2016.1164754 
    ​Details  DOI 
  • 2012 | Journal Article | Research Paper | 
    ​ ​Fungal colonisation of outside weathered modified wood​
    Pfeffer, A.; Hoegger, P. J.; Kües, U.   & Militz, H. ​ (2012) 
    Wood Science and Technology, 46(1-3) pp. 63​-72​.​ DOI: https://doi.org/10.1007/s00226-010-0386-7 
    ​Details  DOI  WoS 
  • 2009 | Journal Article
    ​ ​Protection mechanisms of DMDHEU treated wood against white and brown rot fungi​
    Verma, P.; Junga, U.; Militz, H.   & Mai, C.​ (2009) 
    Holzforschung, 63(3) pp. 371​-378​.​ DOI: https://doi.org/10.1515/HF.2009.051 
    ​Details  DOI  WoS 
  • 2009 | Journal Article | 
    ​ ​The efficacy of commercial silicones against blue stain and mould fungi in wood​
    Ghosh, S. C.; Militz, H.   & Mai, C.​ (2009) 
    European Journal of Wood and Wood Products, 67(2) pp. 159​-167​.​ DOI: https://doi.org/10.1007/s00107-008-0296-7 
    ​Details  DOI  WoS 

Publication List

All Articles (Book & Journal) Articles & Preprints Papers (Journal & Conference)

Type

Subtype

Date issued

Author

Peer-Reviewed

Organization

Language

Fulltext

Options

Citation Style

GRO View APA Chicago MLA Vancouver
https://publications.goettingen-research-online.de URI: /cris/rp/rp36544
ID: 0000000
PREF: default TOKEN:

0

Sort

Issue Date
ASC DESC
Title
ASC DESC

Embed

JavaScript
Link

Export

Activate Export Mode
Deactivate Export Mode

Select some or all items (max. 800 for CSV/Excel) from the publications list, then choose an export format below.