Assessment of Preservative-Treated Wooden Poles Using Drilling-Resistance Measurements
Citable Link (URL):http://resolver.sub.uni-goettingen.de/purl?gs-1/17093
An IML-Resi PD-400 drilling tool with two types of spade drill bits (IML System GmbH, Wiesloch, Germany) was used to evaluate the internal conditions of 3 m wooden poles made from Scots pine (Pinus sylvestris L.). Drilling tests were performed on poles that were industrially vacuum-pressure-impregnated with a copper-based preservative (Korasit KS-M) and untreated reference poles. Both types of poles were subject to 10.5 years of in-ground exposure. Wood moisture content (MC) was measured using a resistance-type moisture meter. MC varied between 15% and 60% in the radial and axial directions in both treated and untreated poles. A higher MC was detected in the underground, top, and outer (sapwood) parts of the poles. Typical drilling-resistance (DR) profiles of poles with internal defects were analyzed. Preservative treatment had a significant influence on wood durability in the underground part of the poles. Based on DR measurements, we found that untreated wood that was in contact with soil was severely degraded by insects and wood-destroying fungi. Conversely, treated wood generally showed no reduction in DR or feeding resistance (FR). DR profiling is a potential method for the in-situ or in vitro assessment and quality monitoring of preservative treatments and wood durability. The technological benefits of using drill bits with one major cutting edge, instead of standard drill bits with center-spiked tips and two major cutting edges, were not evident. A new graphical method was applied to present DR data and their spatial distribution in the poles. Future studies should focus on the impact of preservative treatments, thermal modification, and chemical modification on the DR and FR of wood. This may further elucidate the predictive value of DR and FR for wood properties.